Both spray vermiculite and intumescent paint protect structural steel in a fire. They work in different ways, look very different, and suit different situations. Choosing the right one early saves cost and avoids rework.
How each system works
Spray vermiculite (cementitious fireproofing) is a lightweight plaster sprayed onto the steel. It insulates the steel and slows down heat transfer, so the steel stays below the temperature at which it loses strength for the required time.
Intumescent paint is a thin coating that looks like normal paint. When heated, it swells into a thick insulating char that protects the steel underneath.
Side-by-side comparison
| Spray vermiculite | Intumescent paint | |
|---|---|---|
| Finish | Rough, textured, bulky | Smooth, painted look; topcoat colour available |
| Best for | Hidden steel – above ceilings, plant rooms, warehouses, roof steel | Exposed steel – staircases, canopies, mezzanines, architectural steel |
| Cost | Usually lower for large areas | Usually higher per square metre |
| Speed | Fast to apply over large areas | Several coats; drying time between coats |
| Durability | Can be knocked off by impact; needs repair after works | More resistant to light knocks; topcoat protects it |
| Thickness | Measured in millimetres | Measured as dry film thickness in microns |
What decides the thickness
For both systems, the thickness is not a guess. It depends on:
- the fire resistance period required, for example 1 hour or 2 hours
- the steel section – thin, light sections heat up faster than heavy ones and need more protection
- the product’s tested data from the manufacturer
Your consultant or Qualified Person (QP) will normally state the rating required. The applicator then works out the thickness for each member from the product’s data.
Which one should you choose?
- Steel hidden from view and a large area to cover → spray vermiculite.
- Steel people will see, or a clean finish is needed → intumescent paint.
- Outdoor or damp locations → ask about a system suitable for external exposure, with a protective topcoat.
- Repairing existing protection → usually match the original system.
Not sure which you need?
Send us photos of the steel, the location and the fire rating required, and we will recommend a suitable system. WhatsApp 9072 0570 or email sales@fireproofingsys.com.

Leave a Reply
You must be logged in to post a comment.