Tenants and building owners often find fire protection is affected when a shop, office or warehouse unit is fitted out or reinstated. Steel beams and columns that were fire-protected when the building was completed can lose that protection along the way – usually without anyone noticing until an inspection.
Where fit-outs damage fire protection
- Hanging new services – ductwork, cable trays and sprinkler pipes clamped to beams, with vermiculite chipped away at each bracket.
- New partitions and ceilings – boards cut around steel members, breaking the encasement.
- Signage and fixtures – bolts drilled through coated columns.
- Hacking during reinstatement – removing the previous tenant’s fixtures takes the fire coating with it.
- Water leaks – soaked vermiculite softens, cracks and falls away.
Why it matters
Fire protection keeps structural steel from losing strength too early in a fire, giving occupants time to escape and firefighters time to work. A small bare patch on a beam can be the weak point. It can also hold up your handover, your fire safety certificate or the return of your deposit.
A simple check before handover
- Walk the unit with the ceiling boards open where possible.
- Look at every beam and column connection where new services are fixed.
- Note bare steel, cracks, hollow-sounding areas and patches done with ordinary cement or paint.
- Take photos with a reference to the grid line or location.
- Have the damaged areas repaired with a compatible fire protection system before the ceiling closes.
How we repair it
Damaged vermiculite is cut back to sound material, the steel is cleaned, and new material is applied to match the original thickness. Where the original system was intumescent paint, the area is prepared and recoated to the specified dry film thickness. We record the work with photos for your landlord, QP or management.
Read more about repairing damaged vermiculite fireproof cement.
Doing a fit-out or reinstatement?
Add a fire protection check to your schedule before the ceiling goes up. WhatsApp us photos and the unit address for a quick assessment. WhatsApp 9072 0570 or email sales@fireproofingsys.com.

Leave a Reply
You must be logged in to post a comment.